Kenmore 385.16677 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* Threading
the Needle on the Right
Place the spool of thread on the spool pin second from
the left.
* The points to thread for needle on the right are
marked in blue.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thfead.guide second;
from the left :frpm back.to froni::(A):
v; t ■ t
* If the thread:is coming out from the thread guide
groove, pass the thread, through the thread guide
hole agai.n:as;.shown: (B|Ei;||
(T)
Thread
guide Epr E vli t-.v ■ ■
2. Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
@ Thread guide plate
36