Threading the machine (3 threads), Thread tension (4 threads) – Kenmore 385.16677 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Threading the Machine (3 threads)
Using the needle on the right only
(for regular three-thread serging)
Turn off the power switch and unplug the machine.
Remove the needle and the thread on the left. Then
retighten the needle clamp screw on the left to
prevent losing the screw.
(T) Needle on the right
(2) Needle clamp screw on the left
(D
Using the needle on the left only
(for wide three-thread serging)
Turn off the power switch and unplug the machine,
Remove the needle and the threacTon the right.i
Then retighten the needle clamp; screw on the right;
to prevent losing the screw. V ..V■..
(T) Needle on.the l e f t .
"
:
@ Needle .damp screw on the right
52