Ns€rtiii^ fh@ bobbin – Kenmore 385.19365 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
]ns€rtiii^ fh@ bobbin
H] Piace a bobbin in the bobbin holder with the thread
running off counterclockwise.
(T) End of thread
i Guide the thread into the notch ® on the front side
of the bobbin holder- Draw the thread to the left,
sliding it between the tension spring blades.
® Notch ®
\ Continue to draw the thread lightly until the thread
slips into the notch (D. PuH out about 6” (15 cm)
of thread,
® Notch ®
¡2 Attach the hook cover plate. Check the threading by
referring to the chart shown on the hook cover plate.
©Threading chart
0
36
Advertising