Zipper sewing, Attaching the zipper foot, Fahrjc froparation – Kenmore 385.19365 User Manual
Page 87: Startiiig to sow, Starting to sew -70, Zipper sewing -78 ® attac hing the z ippe r foot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
zipper Sewing
Put in a Zipper
© Stitch pattern:
01
© Thread tension dial:
AUTO
@ E: Zipper foot
° Attaching the Zipper Foot
To sew on the left side of the zipper, attach the foot
holder to the right pin on the zipper fool
To sew on the right side of the zipper, attach the foot
holder to the left pin on the zipper foot.
© Groove
©Pin
@ To sew left side
(4) To sew right side
^ Fahrjc Froparation
Add 3/8” (1cm) to the zipper size. This is the overall
opening size.
® Right side of fabric
®
Opening size
(D
Zipper size
® 3/8” (1 cm)
(D End of opening
(D Slider
© Zipper teeth
® Zipper tape
Place right side of fabric together and sew to the end of the
zipper opening. Reverse stitch to took the stitches.
Manually increase the stitch length to 4,5 and sew the
zipper opening.
® 4,5 (Stitch Length)
® End of opening
® Reverse stitch
® Straight stitch
®
3/4” (2 cm)
® Startiiig to sow
[Tj
Fold back the left seam allowance. Turn under the
seam allowance to form a 1/8"(0,2 to 0,3 cm) fold.
Place the zipper teeth next to this fold and pin in place.
Attach the zipper foot with the right pin in place.
Lower the zipper foot on the top side at the bottom of
zipper so that the needle pierces the fabric next to the
fold and the zipper tape,
©fold
®
1/8" (0.3 cm)
<D
Stitch iine
®
End of opening
(§}
Open size
© Lower fabric
© Wrong side of fabric