Haltech E6X Manual DOS Version - Manual (Page 31)

E6X Manual
31
2.4 The Program Set-up Page
To complete the installation of the programming software the Program Set-up page must be
configured to suit the computer you are using.
Start the Software as described above. When the Title page appears:
Press
N
This will start the Software in the “Offline” mode. The Set-up Window is accessed from the
Set-up menu:
Press ALT-S
There are two setting in the programming set-up page: The display options and the
communications port configuration.
2.4.1 The Display
The Haltech programming software has been written to suit a graphical CGA, VGA or EGA
monitor. In most cases, the programming software will detect what sort of display you have
and select the appropriate mode: “colour” or “monochrome”.
You can also choose to operate in colour or monochrome. Since some older laptop computers
do not have a colour monitor, the monochrome setting should provide better contrast to read
the screen.
2.4.2 Com Port
The programming software can talk to the Haltech ECU through either COM1 or COM2.
Select the communications port you are using here.