Haltech E6X Manual DOS Version - Manual (Page 33)

E6X Manual
33
3.1.1.1 Load Map
Load Map allows the user to load a file that contains all the “set-up” and “map” data the ECU
requires to run a particular engine. This file has been saved during a previous tuning session
when the programming PC was connected to the ECU. When the ECU is “Offline”, the Load
Map function can be used to load the information from an E6X map file (denoted by the
.6XM file extension) into the front-end software to view its contents. If the ECU is “Online”
using the Load Map function will cause the ECU to be loaded with the information stored in
the file all information previously stored in the ECU will be lost.
NOTE:
When using the load function be aware that when the ECU is online all “set-
up” and “map” data currently stored in the ECU will be overwritten.
When you choose the “Load Map” menu item a file window will appear in the centre of the
screen. On the left side of the window is a list of ECU map files available in the current
directory. To select the appropriate map from the list use the up and down cursor keys:
↑↑↑↑
,
↓↓↓↓
Once the desired map is selected:
Press
Enter
The selected filename will be displayed in the horizontal black bar below the text “Opening
File”:
Press
Enter
When the ECU is “Offline” a window will appear with the map details:
Press
Enter
The screen will flash and then return to the title page.