Haltech E6X Manual DOS Version - Manual (Page 40)

E6X Manual
40
The programming software requests the ECU to send the current firmware series and version
numbers and then the maps currently stored in the ECU. The maps will take a short time to
upload to the programming PC (as shown):
When the progress bar reaches 100% the programming software has finished uploading the
data from the ECU and the user can start to use the programming software to set-up and tune
the engine. If the text “RECONNECT HALTECH” flashes this means that the programming
PC cannot communicate with the ECU, check:
- The ECU has power
- The communications cable is connected
- The communications cable is free from faults
3.2.2 The Engine Data Page
The Engine Data page, as its title suggests, displays engine information in real time so the
user knows the operating conditions of the engine at all times. The engine data page can be
used to test that the ECU and its sensors are working correctly.