Product overview, Product contents – Interlogix UltraView PTZ Dome Series User Manual
Page 10
CyberDome II
Installation Manual
2
Product overview
CyberDome II ™ is a line of advanced pan/tilt/zoom (PTZ) cameras. In addition to powerful cameras,
CyberDome II features a graphical programming interface for easier customization of camera settings, and
passcodes for protection against unauthorized access.
The CyberDome II supports many protocols to work with various keypad controllers, digital video recorders,
and other video surveillance equipment. (See
on page 27 for a list of supported protocols.)
Installation of the CyberDome II line of domes is simplified because all power, data, video, and alarm
connections are provided in the housing. Configuration parameters such as presets and tours unique to each
installation site are stored in the housing memory. This allows you to replace cameras or move them between
housings without having to reprogram them for each new site. As you install the first dome, you will find many
other enhancements that make installation easier and quicker.
The general steps for installing your dome include:
•
preparing the mounting surface and installing the mount (if used) and housing;
•
preparing the cables and wiring the housing;
•
addressing the camera site, setting the protocol, and setting the termination;
•
installing the PTZ camera assembly; and
•
installing the dome.
Be aware that the power requirements for CyberDome and CyberDome II are different. See
on page 5 and
Product contents
The CyberDome II consists of the following:
•
Housing.
•
Package containing three connectors (one 2-pin for power; one 6-pin for UTP, auxiliary data, and
RS-485; one 14-pin for alarms and contacts) and a small screwdriver. (The Select version of
CyberDome II has two connectors: a 2-pin connector for power and a 2-pin connector for RS-485
data.)
•
PTZ camera assembly.
•
Dome (mirror domes are shipped with cotton gloves for special handling).
•
Mount (wall-mount and flush-mount versions only).
•
Installation and user manuals.
You may receive the package contents in one large carton containing three boxes (four with wall-mount
versions), or if shipped individually, you may receive three (or four) separate boxes. One box will contain the
housing, connectors, and manuals. The PTZ assembly, dome, and mount (for wall-mount versions) are each
shipped in separate boxes.
Inspect the packages and contents for visible damage. If any components are damaged or missing, do not use
the unit; contact the supplier immediately. If you need to return the unit, you must ship it in the original box.