Wiring best practices, Pendant-mount wire routing, Figure 8. top view of pendant-mount cabling – Interlogix UltraView PTZ Dome Series User Manual
Page 17
Advertising
Chapter 2
Housings and cables
9
Wiring best practices
To ensure the wires are connected properly and not at risk of being cut or frayed, follow these guidelines.
Pendant-mount wire routing
Cables run down through the cable entry hole and the dust seal. Take care to avoid damaging the dust seal
during installation.
Note: Keep service loops out of housing area when possible.
Figure 7. Side view of pendant-mount cabling and typical wall-mount
Figure 8. Top view of pendant-mount cabling
Upper bracket
Dust seal
Cabling
Cable entry hole
Cables fed through
mount and housing
Screws
Wall-mount
Safety chain
Advertising