Flush-mount wire routing, Figure 9. side view of flush-mount cabling, Figure 10. top view of flush-mount cabling – Interlogix UltraView PTZ Dome Series User Manual
Page 18
Advertising
CyberDome II
Installation Manual
10
Flush-mount wire routing
Cables are fed through the cable entry hole in the side (or top) of the housing. Route the wires through the top
or side of the housing and around the camera bracket.
Note: Keep service loops out of housing area when possible.
Figure 9. Side view of flush-mount cabling
Figure 10. Top view of flush-mount cabling
Upper bracket
Advertising