Interlogix UltraView PTZ Dome Series User Manual
Page 3
iii
4. Object code. The Software is delivered in object code only. You may not alter, merge, modify, adapt, or
translate the Software, nor decompile, disassemble, reverse-engineer, or otherwise reduce the Software
to a human-perceivable form, nor create derivative works or programs based on the Software.
5. Limited warranty. GE warrants that for one (1) year from the date of delivery of the Licensed Product
(Software Warranty Period), the functions contained in the Software will be fit for their intended purpose
as described in the applicable Documentation from GE, and will conform in all material respects to the
specifications stated in such Documentation. GE does not warrant that the operation of the Software will
be uninterrupted or error-free. GE does warrant that the media on which the Software is furnished will be
free from defects in materials and workmanship under normal use for a period of thirty (30) days from the
date of delivery (Media Warranty Period). Except as specifically provided therein, any other software and
any hardware furnished with or accompanying the Software is not warranted by GE.
Your exclusive remedy under this limited warranty for nonconforming Software shall be repair or replace-
ment of the Software, at the sole discretion of GE. To obtain a repair or replacement of nonconforming
Software, contact GE Customer Service toll-free at 888 GE Security or online at
during the Software warranty period.
Except as expressly provided above, the licensed product is provided “as is” without warranty of any kind,
either expressed or implied, including, but not limited to, implied warranties of merchantability or fitness
for a particular purpose and, except as expressly provided above, You assume the entire risk as to the
quality and performance of the licensed product.
6. Limitation of liability. GE’s sole obligation or liability under this agreement is the repair or replace-
ment of nonconforming software and/or defective media according to the limited warranty above. In no
event will GE be liable for damages, whether consequential, incidental, or indirect, nor for loss of data, loss
of profits, or lost savings, arising from use or inability to use the software or documentation (or any hard-
ware furnished with the software), even if GE has been advised of the possibility of such damages, nor for
any claim by any third party.
7. General. Any materials provided to You by GE shall not be exported or reexported in violation of any
export provisions of the USA or any other applicable jurisdiction. Any attempt to sublicense, assign, or
transfer any of the rights, duties, or obligations hereunder shall be void. This Agreement shall be gov-
erned by and interpreted under the laws of the State of New York, United States of America, without
regard to conflicts of law provisions. You hereby consent to the exclusive jurisdiction of the state and fed-
eral courts located in Multnomah County, Oregon, to resolve any disputes arising under or in connection
with this Agreement, with venue in Portland, Oregon.
8. Restricted rights legend. The Licensed Product is provided with RESTRICTED RIGHTS. In the event the
United States Government or an agency thereof is granted a license, the following additional terms apply:
Restricted Computer Software, as defined in the Commercial Computer Software–Restricted Rights
clause at Federal Acquisition Regulations 52.227-19, and the restrictions as provided in subparagraphs
(c)(1) and (c)(2) thereof; and as applicable, the Government’s rights to use, modify, reproduce, release, per-
form, display, or disclose the Software also are restricted as provided by paragraphs (b)(2) and (b)(3) of the
Rights in Noncommercial Technical Data and Computer Software–Small Business Innovative Research
(SBIR) Program clause at DFARS 252.227-7018.
9. Acknowledgment. You acknowledge that You have read and understand this agreement and agree to
be bound by its terms. You further agree that this agreement is the complete and exclusive statement of
the agreement between You and GE, and supersedes any proposal or prior agreement, oral or written,
and any other communication relating to the subject matter of this agreement.
Intended use
Use this product only for the purpose it was designed for; refer to the data sheet and user documentation.
For the latest product information, contact your local supplier or visit us online
.
Intended use
Use this product only for the purpose it was designed for; refer to the data sheet and user documentation. For
the latest product information, contact your local supplier or visit us online at
FCC compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
You are cautioned that any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EMC directive
The European Union directive on electromagnetic compatibility (2004/108/EC) requires non-European manu-
facturers to designate an authorized representative in the Community.
Our European representative is GE Security, Kelvinstraat 7, 6003 DH Weert, Nederland.
The European directive Waste Electrical and Electronic Equipment (WEEE) aims to minimize the impact of elec-
trical and electronic equipment waste on the environment and human health. For proper treatment,
recovery, and recycling, return the equipment marked with this symbol to your local supplier upon the pur-
chase of equivalent new equipment, or dispose of it in designated collection points. For more information,
visit
Regulatory