CK Electric Part C3000 - Manual (Page 161)

8-2 Setup and Other Utilities in the Desktop Manager Chapter 8
Setting Up MultiPASS C3000 Options in the
Desktop Manager
The Desktop Manager contains Setup options that define the operation
of your MultiPASS C3000.
When you first install the Desktop Manager, the Setup options are set to
default settings that enable you to begin using your MultiPASS C3000
with the Desktop Manager immediately. However, you can change the
option settings as needed.
To change Setup options in the Desktop Manager:
1. From the Setup menu, click the group of setup options you want to
change.
2. In the Setup Options dialog box, click the appropriate tab for the
options you want to display.
3. On the appropriate setup tab, specify your changes.
4. To save any changes and close the dialog box, click OK.
To exit the dialog box without saving your changes, click Cancel.
MPC-3000—USERS MANUAL/V000/07-97