CK Electric Part C3000 - Manual (Page 47)

2-22 Printing With the MultiPASS C3000 Chapter 2
MPC-3000—USERS MANUAL/V000/07-97
❍ Align the edge of the paper with the right edge of the
sheet feeder.
❍ Secure the stack with the paper guide.
❍ Start your print operation.
Auto Feed Guidelines
When automatically feeding stacks of paper, follow these guidelines:
❍ Do not leave paper stacked in the printer for long periods of time;
longer sheets of paper may become bent or curled over time. This
may cause the paper to misfeed or jam.
❍ If your printed page contains lots of graphics, the ink on the page
may be damp due to the print density. Remove the page right away
and allow the ink to dry.
❍ The capacity of the paper output tray is 20 sheets of paper. To
reduce paper jams, remove paper from the output tray before the
count reaches 20.
❍ If paper curls after printing, remove it immediately; otherwise,
paper jams may occur.
CANON INC.
TAMAGAWA PLANT
3-16-1, SHIMONOGE, TAKATUKU, KAWASAKI-SHI, KANAGAWA 213, JAPAN PHONE:(044)811-2111
Slide the stack
of paper into
the sheet feeder
until it stops.
4
P
AP_ST
A
CK_IN