CK Electric Part C3000 - Manual (Page 166)

Chapter 8 Setup and Other Utilities in the Desktop Manager 8-7
MPC-3000—USERS MANUAL/V000/07-97
Setup and Utilities Desktop Mana
g
er
Setting Up Receive Fax Options
❍ Paper Size and Reduction
You specify the size of paper in the sheet feeder and whether you
want an incoming fax reduced (approximately 98%) to ensure the
contents fit on the paper on which it is printed.
❍ Answer
You specify the Receive Mode. Initially, you set the Receive Mode
when you installed the Desktop Manager.
You use the Silent Receive option to specify whether the optional
telephone should ring when you receive a call. The type of call for
which the device will ring is determined by the Receive Mode. The
ringing will occur for a fax call only (Fax Only mode), or fax and
telephone calls (Fax/Tel mode).
You can set the number of rings (1-99) before the MultiPASS C3000
will respond to any call. If the Receive Mode is Fax Only, this is the
number of rings before the MultiPASS C3000 answers the call. In
FaxTel mode, this is the number of rings before the MultiPASS
C3000 answers to determine if the call is from a fax or a telephone.
MDM_4.TIF