CK Electric Part C3000 - Manual (Page 93)

to open the operator panel to remove the document (see page 10-3).
Sending a Document to More Than One
Location (Sequential Broadcasting)
Sequential broadcasting sends one document to more than one location.
You can send to a total of 57 destinations as follows:
One-touch speed dialing = up to 6 destinations
Coded speed dialing = up to 50 destinations
Regular dialing (numeric
buttons dialing) = 1 destination only
You can enter the one-touch and coded speed dialing numbers in any
order. You simply press the one-touch speed dialing button, or press
CODED DIAL
followed by the two-digit code.
You can also include one destination using regular dialing. This must be
the last number you enter because you must press
START/COPY
after
entering the number.
N If you often send to the same group of destinations, use group dialing
(see page 4-5).
Transmitting the Document
❍ Place the document face-down in the ADF.
DOCUMENT READY
Feed the
document.
1
MPC-3000—USERS MANUAL/V000/07-97
4-10 Sending Faxes With the MultiPASS C3000 Chapter 4