CK Electric Part C3000 - Manual (Page 177)

8-18 Setup and Other Utilities in the Desktop Manager Chapter 8
When you installed the Desktop Manager, the MultiPASS Background
was placed in the Windows StartUp group and is automatically opened
when you open Windows.
If you decide you need to disconnect the MultiPASS C3000 from the
designated port and/or attach another device to the port, you should
close the MultiPASS Background first. If you close the MultiPASS
Background first, you avoid receiving error messages when the
MultiPASS Background detects it can no longer communicate with the
MultiPASS C3000.
When you start the Desktop Manager again at a later time, the
MultiPASS Background is automatically reopened if your MultiPASS
C3000 has been reconnected to the port. You can also open the
MultiPASS Background without opening the Desktop Manager.
N
If you are closing the MultiPASS Background, you may want to set the
MultiPASS C3000 to print any received faxes. With the MultiPASS
Background closed, received faxes cannot be moved to the Desktop
Manager. Received faxes can also be stored in the MultiPASS C3000
memory. However, if the memory becomes full, the MultiPASS C3000 is
unable to receive more faxes until you print the faxes stored in memory.
To close the MultiPASS Background in Windows 95:
1. Close the MultiPASS Desktop Manager.
2. On the Windows taskbar, click the right mouse button on the
MultiPASS Background button. In the displayed menu, click Close.
To close the MultiPASS Background in Windows 3.1x:
1. Close the MultiPASS Desktop Manager.
2. On the Windows desktop, click the left mouse button on the
minimized MultiPASS Background icon. In the displayed menu,
click Close.
Do not delete the MultiPASS Background icon from the Canon
MultiPASS C3000 group.
MPC-3000—USERS MANUAL/V000/07-97