CK Electric Part C3000 - Manual (Page 237)

Entering Information in the
MultiPASS C3000
When using the MultiPASS C3000 as a stand-alone fax machine, you
must enter your user information into the unit through the operator
panel.
When entering information through the operator panel of the
MultiPASS C3000, follow these guidelines.
❍ If you pause and do not make an entry for more than 60 seconds,
the MultiPASS C3000 returns to Standby mode. You must start the
procedure over from the beginning.
❍ If you make a mistake while entering registration information, you
can correct it in one of two ways:
•
Press < or > to move the cursor under the wrong character, and
then enter the correct character.
•
Press
STOP
and reenter the information.
Entering Your User Information
Follow the steps below to set the date and time for your MultiPASS
C3000 and to enter your fax number and your name. The date and time
appear in the LCD display as well as on the documents you send. Your
fax number and name appear on each document you send.
MPC-3000—USERS MANUAL/V000/07-97
B-2 Using the MultiPASS C3000 as a Stand-alone Fax Appendix B