CK Electric Part C3000 - Manual (Page 54)

Chapter 2 Printing With the MultiPASS C3000 2-29
MPC-3000—USERS MANUAL/V000/07-97
Printing
Using Canon’s Specialty Papers
This section provides guidelines for printing on Canon’s Specialty
Papers and describes special procedures required for High Resolution
Paper and Fabric Sheets.
Specialty Paper Guidelines
N Be sure to read any instructions that come with your Canon Specialty
Paper. These instructions provide important information regarding how
to achieve the highest print quality with these papers.
For transparency film, back print film, high gloss film, and glossy photo
paper, follow these guidelines:
❍ When automatically feeding transparencies or back print film,
remove each sheet after it is delivered. Do not allow film sheets to
stack up.
❍ Let the printed sheets of film or paper dry completely before storing
them.
Paper type Drying time
Canon Glossy Photo Paper GP-210 10 minutes
Canon Fabric Sheet FS-101 1 hour
Canon CF-102 Transparencies 15 minutes
Canon Back Print Film BF-102 15 minutes
❍ When a sheet of film has dried completely, cover its printed side
with a sheet of plain (not coated) paper before storing it; this is
recommended even if you place the sheets of film in a clear file or
plastic holder.
FILM_DR
Y