CK Electric Part C3000 - Manual (Page 194)

Maintaining the
MultiP
ASS C3000
C
❍ Do not try to move the cartridge holder manually; this may
damage the unit. If the cartridge holder does not move and the
unit beeps several times, unplug the MultiPASS C3000 and let it
cool for several minutes. (The device has an automatic protection
mode that prevents it from overheating.) After allowing it to cool,
plug the unit in again and press the
CARTRIDGE
button to move
the cartridge holder to the center of the unit.
❍ Hold the BJ cartridge on the sides only. Do not touch the silver
plate on the bottom of the BJ cartridge or the silver metal or circuit
area on the side. The metal area may become hot during printing.
❍ Gently pull up on it.
❍ Dispose of the old BJ cartridge, or store it in the
Ink Cartridge Storage Box.
Ink Cartridge
BCl-21
Color
Made in Japan
Color Slot
Ink Cartridge
BCl-21
Black
Made in Japan
Black Slot
Color BJ
Cartridge BC-21 Made in Japan
Dispose of
or store the
BJ cartridge.
4
Lift the green
lock lever on the
cartridge holder.
3
Chapter 9 Maintaining the MultiPASS C3000 9-11
MPC-3000—USERS MANUAL/V000/07-97
L065
LEVER_UP