Microsoft Surface 3 - Manual (Page 101)

© 2014 Microsoft Page 101
Figure 5.3: WMI Model Name for Surface Pro 3.
To add automatic selection of a task sequence for Surface Pro 3 devices, follow these steps:
1. Expand the Deployment Shares tree in the Deployment Workbench.
2. Right-click the production deployment share and select Properties.
3. Select the Rules tab.
4. Replace the [Settings] section of the text with the following, which will add the instructions for rules specified
with the built-in Model variable to be processed before the default rules using the Priority rule. The Priority rule
is used to define how the sections in the customsettings.ini file are processed by the MDT scripts.
[Settings]
Priority=Model,Default
Properties=MyCustomProperty
5. Add a new section for the Model value shown in the command result in Figure 5.3, but include the name in
square brackets. For example, [Surface Pro 3] is the name of the section for the Surface Pro 3 model. The new
section is added to the text between the [Settings] and [Default] sections with the following text:
[Surface Pro 3]
6. Under the [Surface Pro 3] section, add these two rules:
SkipTaskSequence=YES
TaskSequenceID=SP3Win8.1EntCst
The two rules in the new [Surface Pro 3] section are: