Microsoft Surface 3 - Manual (Page 121)

© 2014 Microsoft Page 121

General Settings – Enter the following configuration for the offline media and then click Next.

Media Path – Enter or browse to the location where the offline media should be created. This location
should be outside the deployment share.

Comments – Enter any desired comments for the offline media.

Selection Profile – Select the Everything selection profile to include all content from the offline deployment
share in the offline media. In a deployment share with multiple computer models, specific selection profiles
can be used from this menu to create targeted offline media.

Summary – Confirm the options selected on the General Settings page and click Next.

Progress – Displays a progress bar as the offline media is generated.

Confirmation – Provides confirmation of the successful creation of the offline media files. Click Finish.
Configuring Offline Media Rules
Offline media uses rules that are separate from the rules of the deployment share. Each set of offline media files
includes separate bootstrap.ini and customsettings.ini files. To customize these rules for the offline media deployment
process, follow these steps:
1. Right-click the production deployment share in the Deployment Workbench and select Properties.
2. Select the Rules tab, highlight the contents, right-click and select Copy.
3. Expand the Advanced Configuration folder of the offline deployment share and select the Media folder.
4. Right-click MEDIA001, the newly created offline media files, and select Properties as shown in Figure 5.19.
Figure 5.19: Deployment Workbench Showing the Offline Media Properties Menu Option.
5. Select the Rules tab and highlight the contents.