Microsoft Surface 3 - Manual (Page 142)

© 2014 Microsoft Page 142
Figure 6.15: Apply Operating System Image Step.
5. Check the Use an unattended or Sysprep answer file for a custom installation check box from the Properties
tab for the step.
6. The Package field displays the Settings package that was specified during creation of the task sequence.
7. The File name field displays the name of the answer file that will be used. A file matching this name placed in
the settings package location will be used during deployment.
8. Close the Task Sequence Editor.
To modify the answer file used for deployment, follow these steps:
1. Launch Windows System Image Manager from the Start Screen, under Windows Kits.
2. Open the File menu and click Open Answer File.
3. Open the Unattend.xml answer file located in the storage location specified for the settings package during
creation of the task sequence.
4. Open the File menu and click Select Windows Image.
5. Select the image file that you imported from the lab deployment server. If a catalog has not yet been generated
for this image, it will be generated when the image is selected.
6. Modify the CopyProfile setting using the steps outlined in the Creating the Test Deployment Task Sequence
section in Chapter 4 .
7. Save the answer file and close Windows System Image Manager.