Microsoft Surface 3 - Manual (Page 61)

© 2014 Microsoft Page 61
Note: Specifying the selection profile in the deployment task sequence will make the task sequence applicable
to Surface Pro 3 only. Selection profiles can also be specified with model specific deployment share rules. See
the
Customizing Rules for Automation section of Chapter 5 .
Preparing Boot Media
Preparing boot media is comprised of two separate steps, each of which is described in this chapter:

Generating boot media – creates the media that the target deployment computer boots from.

Configuring network boot – configures the environment that enables the boot media to read the deployment
share on the deployment server.
The concept of boot media is described in more detail in Chapter 2 .
Generating Boot Media
After the task sequence is created, you need to generate the boot media to be used on the Surface Pro 3 device that will
connect to the deployment share (including access to the task sequence and source files). To generate boot media,
follow these steps:
1. In the MDT Deployment Workbench, expand the deployment share.
2. Right-click the name of your deployment share and click Update Deployment Share. This launches the Update
Deployment Share Wizard, as shown in Figure 3.26.
Figure 3.26: Update Deployment Share Wizard.