Microsoft Surface 3 - Manual (Page 64)

© 2014 Microsoft Page 64
Figure 3.28: Surface Pro 3 Device Booting from the Network.
6. The network adapter will receive an IP address from a DHCP server and after the WDS PXE service is detected,
will prompt the user to press ENTER to begin the network boot process as shown in Figure 3.29.
Figure 3.29: Confirmation of Successful Connection to WDS Server.
Note: In order to press the Enter key, the Surface Type Cover or a USB keyboard should be connected.
After the network boot process has been initiated, the boot image generated for the MDT deployment share
(LiteTouchPE_x64.wim) will load. A progress bar appears along with the name of the loading image, as shown in Figure
3.30.
Figure 3.30: Network Boot Progress Bar.