Microsoft Surface 3 - Manual (Page 118)

© 2014 Microsoft Page 118
o Linked deployment share UNC path – Enter or browse to the location of the offline deployment
share.
Note: The location used here must be the network share location, not the local location. For
example, use \\SP3ProdDeploy\OfflineDeploymentShare$. Do not use:
E:\OfflineDeploymentShare
o Comments – Enter any desired comments for the linked deployment share.
o Selection Profile – Select the Everything selection profile from the drop down menu.
Note: Alternatively, the task sequences, applications, images, and drivers could all be specified in
the Surface Pro 3 Win 8.1 x64 selection profile and this selection profile could be selected here. This
is beneficial in scenarios where the production deployment share contains other computer models
or applications not desired in the offline media.
o Replication Method – Select the Merge the selected contents into the target deployment share
option to indicate that components from the production share should be added to the offline
deployment share. Alternatively, to replace all components in the offline deployment share, select
the Replace the contents of the target deployment share folders with those selected option.

Summary – Confirm the specified options and click Next.

Progress – A progress bar will be displayed as the link is created.

Confirmation – Confirmation of the successful link of the deployment share will be displayed here. Click
Finish.
5. Right-click the linked deployment share item LINKED001 and select Replicate Content as shown in Figure 5.17,
which launches the Replicate to Linked Deployment Share dialog box.
Figure 5.17: Deployment Workbench Showing Replicate Content Menu Option.