Microsoft Surface 3 - Manual (Page 116)

© 2014 Microsoft Page 116
Figure 5.14: Deployment Workbench Showing Three Deployment Shares.
Linking the Deployment Shares
After the offline and production deployment shares are open side-by-side, the components from the production
deployment share will need to be copied to the offline deployment share. This can be done manually, through Copy and
Paste, as was done between the lab deployment share and production deployment share, or can be done through
automated means via linked deployment shares.
To link the offline deployment share to the production deployment share and to copy the necessary components, follow
these steps:
1. Open the Deployment Workbench and expand the production deployment share.
Note: Linked deployment shares must be initiated from the source deployment share whose contents will be
copied to another target deployment share. Linked deployment shares cannot be initiated from the target
deployment share.
2. Expand the Advanced Configuration folder and select the Linked Deployment Shares folder as shown in Figure
5.15.