Microsoft Surface 3 - Manual (Page 46)

© 2014 Microsoft Page 46
Figure 3.12: New Deployment Share Wizard.
The New Deployment Share Wizard presents a series of sequential steps, as follows:

Path – Enter the path to your deployment share. It can reside anywhere you would locate a shared folder, but
for this scenario, you can accept the default path of C:\DeploymentShare. Click Next.

Share – Enter the name of the deployment share. The default inclusion of the dollar sign ($) character indicates
that an administrative share is created, causing the deployment share not to be visible when browsing the
network. You can accept the default value of DeploymentShare$. Click Next.
Note: The deployment share name cannot contain spaces. Some of the scripts included in MDT are not
compatible with deployment share names that contain spaces.

Descriptive Name – Give the deployment share a descriptive name. By default, this value is MDT Deployment
Share, which is acceptable for this scenario. This value is used to differentiate between deployment shares in
the MDT Deployment Workbench. Click Next.

Options – Enables the configurations of defaults for this deployment share, as shown in Figure 3.13. For this
scenario, ensure all of the following options are selected, then click Next:
o Ask if a computer backup should be performed – If selected, this option prompts the user to create an
image backup of the computer before performing the deployment.
o Ask for a product key – If selected, this option prompts the user for product key during the deployment
process. This option is not selected by default.