Microsoft Surface 3 - Manual (Page 77)

© 2014 Microsoft Page 77
Note: Enabling Windows Update during deployment will significantly increase the time required to perform the
deployment task sequence. The increase in time is dependent on how many updates must be installed.
The task sequence is now configured to install Windows Updates on the reference system.
Deploying to the Reference System
Network boot is required to deploy to the reference system. See Chapter 3 for a complete walkthrough of configuring
WDS for network boot, generating boot media, and importing boot media for use with WDS. These steps are required
before proceeding.
To deploy an image to the reference system, follow these steps:
1. Verify the boot order is configured to boot from the network as the first priority in the settings of the Hyper-V
virtual machine as shown in Figure 4.6:
Figure 4.6: Boot Priority in Hyper-V Virtual Machine Settings.
2. In Hyper-V, start VM2, which is a blank virtual machine. The adapter will receive an IP address from the DHCP
server and then contact the PXE server.
3. After the PXE server is found, the PXE boot screen is displayed, as shown in Figure 4.7.