Microsoft Surface 3 - Manual (Page 147)

© 2014 Microsoft Page 147
Figure 6.19: Deployment User Experience.

Alerts – You can configure alerts for success or failure of the deployment, click Next.

Distribution Points – You can configure how the client will interact with content on the distribution point.
Set Deployment options to Download content locally when needed by running task sequence.

Summary – The selected options will appear, click Next.

Progress – A progress bar is displayed during the creation of the deployment.

Completion – Success will be reported, click Close.
Note: The Network Access Account, specified under Administration  Site Configuration  Sites  Site Name
Configure Site Components  Network Access Account must be configured for successful deployment. When the
computer reboots into WinPE these credentials provide access to the required components.
After the deployment is configured and set to required, communication between the distribution point and the SCCM
client will initiate the deployment process automatically. There is no user interaction on the client system. After the
client discovers the available new operating system it will download the needed content to the client and initiate the
process. This process will occur only during the times specified in the Scheduling page of the Deploy Software Wizard
and the maintenance period allotted in the Software Center on the client system as shown in Figure 6.20.