Microsoft Surface 3 - Manual (Page 131)

© 2014 Microsoft Page 131
Note: The location of the drivers to be imported must be a network share (UNC).

Driver details – A list of the drivers found will appear on this page, specify the following options as shown in
Figure 6.5, and then click Next.
o The following drivers will be imported – All drivers found should be selected if you imported all
drivers from the Surface Ethernet Adapters folder.
o Enable these drivers and allow computers to install them – Ensure that this option is selected to
allow these drivers to be used.
o Assign this driver to one or more categories for filtering – Select the Categories button to launch
the Manage Administrative Categories dialog.
 Click Create to create a new administrative category.
 Provide the name Surface Pro 3 in the Specify the name of the new administrative
category field of the Create Administrative Category dialog box, then click OK.
Figure 6.5: Driver Details in Import Drivers Wizard.

Add Driver to Packages – Create a new package for Surface Pro 3 devices by following steps shown in Figure
6.6, then click Next.
o Click New Package to create a new package.
o Complete the Create Driver Package dialog with following options, then click OK.