Microsoft Surface 3 - Manual (Page 128)

© 2014 Microsoft Page 128
Integrating MDT with SCCM
Before the deployment process can be configured, the MDT components will need to be added to SCCM. This is done
through a wizard, named Configure ConfigMgr Integration, which is launched outside of either tool. To integrate MDT
with SCCM, follow these steps:
1. Launch the Configure ConfigMgr Integration wizard from the Start Screen under Microsoft Deployment Toolkit
on your SCCM server.
2. The Configure ConfigMgr Integration wizard presents the following options:

Options – Select the following options as shown in Figure 6.2, then click Next.
o Check the Install the MDT console extensions for System Center 2012 R2 Configuration Manager
check box.
o Check the Add the MDT task sequence actions to a System Center 2012 R2 Configuration Manager
server check box.
o Site server name – Specify the site server for integration with MDT.
o Site code – Specify the code for the site for integration with MDT.
Figure 6.2: MDT ConfigMgr Integration Options.

Confirmation – Confirm the success of the operation and click Finish.