Microtel MicroWin 2000 - Manual (Page 23)

MicroWIN 2000 Manual
Version 1.0
18
When finished editing the New Entry, click the button labeled Save to save this entry. The current
form will change back to the Setup Entries form. The new entry will be listed in the entry box.
If this or any other entry needs to be changed, just select this entry from the Entry Names list and
click the button labeled Edit Setup.
Set Up COM Port
Now that an entry is setup, the next task is to setup the COM Port to connect up to the dialer.
From the Setup MicroWIN Entries form, click on the menu option Setup and select the menu
option Ports.
MicroWIN 2000 can control up to 4 COM Ports. Each port can be set to either connect locally
(Local), connect remotely (Modem), or set as unused (None).
Move to the COM Port that will be used to connect with. In the upper left corner of this form,
there is a field labeled COM #. This tells which COM Port Settings that are currently being
viewed (1 through 4). Move to the desired COM Port by clicking on the little button next to this
COM Port Number.