Microtel MicroWin 2000 - Manual (Page 40)

MicroWIN 2000 Manual
Version 1.0
35
Click on the Save button to finish setting up this entry.
Send the Archiving Configuration to the Dialer
To send the archive configuration to the dialer, move to the Realtime Data form: click the
Realtime button on the Setup MicroWIN Entries form.
The information that is going to be sent is a part of the current entry’s dialer configuration. On
the Realtime Data form, the way to tell MicroWIN 2000 to communicate specific information to
a dialer is by selecting the desired information to transfer.
Connect to the Dialer
Depending on the method of connecting to the dialer, click the appropriate button.
If the method of connecting is by modem, click on the Modem button. This will schedule the
current entry to make a callout to the next available COM Port setup as an outgoing Modem.
If the dialer is connected directly to the computer COM Port, click on the Local button. This will
bring up a dialog box that will ask for which COM Port to use. This dialog box will show which
COM Ports are currently setup and which are in use. Choose the COM Port that has previously
been setup to be Local by clicking on the small box to the right of the desired COM Port.