Microtel MicroWin 2000 - Manual (Page 69)

MicroWIN 2000 Manual
Version 1.0
Receive Stored Dialer Archives (# to Receive)
Each channel contains a button under this heading. Clicking one of these buttons for a specific
channel will give a command to download the current archives for this channel.
When this entry is connected to its dialer, the caption on this button will show the number of
channel archives that the dialer thinks need to be transferred.
When the entry and dialer first connect, this number will show that the dialer thinks that all of the
recorded archives will need to be sent to this entry. When an entry’s channel goes to download
archives, the first thing MicroWIN 2000 does is to find out the last archive time that is currently
stored in this entry’s database. This time is sent to the dialer. From this, the dialer starts
downloading only those records that are newer than this sent time. Now, the number to receive
will show the actual number left to receive.
This archive action is active when the box next to this button is marked. Click on this button
again to inactivate a channel from receiving archives.
When this entry is not connected, the caption will be displayed with a ‘-’.
Last Recorded Archive Time-Stamp
This field tells when the last known dialer archive for a particular channel was taken. When an
entry and dialer are connected, the most recent archive record time stamp times are transmitted
along with the received realtime data.
When the entry and dialer disconnect, this time will still show the last known archive time record
for a channel.
User Demanded Archive
Each channel under the heading User Snap has a button that gives this entry’s dialer channel a
command to record a User Demanded Archive. This user demanded archive command tells the
dialer to do a basic status archive for the desired channel. When viewing these user demanded
archives after they were downloaded, the Archive Reason for these will be User Demanded
Archive.
See
Archive Records Menu Below.
Clear Dialer Channel Records
Each channel under the heading Clear Recs has a button that gives this entry’s dialer channel a
command to delete all currently recorded archives. To clear the recorded archives for a particular
channel, click on the appropriate channel Clear Rec button.
This feature is Password Protected. If the dialer password hasn’t been entered yet this call, MicroWIN
2000 will ask for it. Once entered properly, it won’t be asked for until the next time this entry connects.
Summary Page, Realtime Data, and Snapshot Menu buttons at the bottom of the form are
movement buttons used to easily change to the indicated form.
64