Microtel MicroWin 2000 - Manual (Page 80)

MicroWIN 2000 Manual
Version 1.0
The following is a list of the settings that can be configured using this form. Each gives a
description of what the field is used for.
Calendar Name
This is a 50 character descriptor for the Calendar configuration. This is simply a label to help
describe how the calendar information is programmed.
Call List
When a Call At Time occurs (See below), this set of telephone numbers will start being called
out to. For more information about Phone Numbers and editing the call out list, see the sections
Editing Telephone Numbers and Editing an I/O Point/Telephone List below.
Call At Times
The dialer can be programmed to make call outs at a particular time on a particular day of the
week. Each day can be set to a different time. This time is setup as HHMM, where HH=Hours
and MM=Minutes. It is in military time. For example, 0800 is 8 A.M. and 1430 is 2:30 P.M.
There is an easy way to set Every Day or just Weekdays to a particular call at time. Simply
enter the time in the box shown below and click on the button next to the Every Day label or
Weekdays label. This will update the days appropriately.
Call Periods
A dialer’s call outs can be limited to certain times of the day. For a particular day, it can be
Enabled or Disabled between the programmed time frame. Also, it can be set to always enabled
(Always) or disabled (Never) for call outs during a day.
There is an easy way to set every days Enable or Disable time frame. Simply enter the desired
time frame in the boxes shown below and click on the button next to the Enable All label or
Disable All label. This will update the days appropriately.
Save / Default / Restore / Cancel
At the bottom of the form, there are the standard Save/Default/Restore/Cancel buttons.
Save will save the edits that were made and move back to the Edit Entry Configuration form.
Default will reset all the settings back to the system defaults. A dialog will ask if this is the
desired action.
Whenever this form is opened, all the current settings are remembered in a temperary buffer.
Restore will reset all the settings back to these remembered settings when the form was opened.
Cancel will cancel all the edits that have currently been made on this form. A dialog will ask if
this is the desired action.
75