Microtel MicroWin 2000 - Manual (Page 65)

MicroWIN 2000 Manual
Version 1.0
Snapshot Menu
While an entry and dialer are connected, a recorded snapshot can be taken. An entry can be setup
to automatically call to its dialer and record a snapshot or a user can manually connect up and
record some number of snapshots. Also, when a dialer alarm call-in occurs, it connects up and
sends a snapshot and hangs up.
The Snapshot Menu lets the user view, print, and even delete these recorded snapshot records.
The body of this form contains two list boxes. These contain all the current snapshot records for
selected entry. Each box is ordered by a time stamp. This time stamp represents the time on the
dialer when the snapshot was sent.
Snapshot Record Actions
When a snapshot is taken, it is first put into the Unselected Snapshots list. This list contains
those snapshot records that the user isn’t planning to perform actions on. The following actions
are done to move the records between these two lists.
Move all snapshots from the Unselected Snapshots list over to the Selected Snapshots list.
Move only the highlighted record in the Unselected Snapshots list over to the Selected
Snapshots list. Another way to move over individual records is by double-clicking the desired
records in the Unselected Snapshots list.
Move only the highlighted record in the Selected Snapshots list over to the Unselected
Snapshots list. Another way to move over individual records is by double-clicking the desired
records in the Selected Snapshots list.
Move all Selected Snapshots over to the Unselected Snapshots list.
60