Microtel MicroWin 2000 - Manual (Page 39)

MicroWIN 2000 Manual
Version 1.0
34
Master Archiving Enable Switch
For any automatic Archiving to occur, Status or Time Based Archiving, the Master Archiving
switch will need to be enabled. This gives the user a way to disable a dialer’s archiving without
clearing out the dialer’s archive memory.
Initialize Archiving When I Send Configuration
When this is marked and the archive configuration is sent, all archived data that is currently on
the dialer will be deleted. It will start a new archive with the current configuration settings. This
is recommended for new systems.
What Happens When an Archive Configuration is Sent Without This Initialize Archiving marked?
If this is not marked and the archive configuration is sent, all channels whose archiving
information hasn’t changed will not be affected and will continue to archive as normal.
If a channel’s archive settings has changed, particular events will occur to keep the dialer
archiving in line.
Max Archives Changes
If the Max Archives for a channel goes up, this channel will be able to record more records than
before. The records that are currently recorded will not be affected.
If the Max Archives goes down, this channel will only keep the newest archives to fill in the new
channel archive size. The rest of the archives will be deleted.
Status or Time Archiving Changes Enable Status
If either changes the Enable Status, an archive will be recorded specifying what has changed.
If Time Archiving is now Enabled or Time Interval has changed, it will start again with
another First Time Archive.
Saving the Changes to Archiving
After all the Archiving information is setup as desired, click on the file menu and click on the
Save Configuration menu option. This will save the changes that have been made to the
archiving setup and move back to the Edit MicroWIN Entry form.