Microtel MicroWin 2000 - Manual (Page 43)

MicroWIN 2000 Manual
Version 1.0
38
It also shows the number records have been received from the dialer to MicroWIN 2000.
The above example shows current archiving information about each channel. It shows that channel 1,
named Pump Fail, has been setup to record a total of 400 archives. The channel has currently recorded
7 of these archives. When all 400 archives get recorded for this channel, any new records will overwrite
this channels’ oldest recorded archives, i.e. only the newest 400 archives will be stored for this channel.
0 archives have been received from this channel while 7 archives could still be received. The last time
an archive was recorded for this channel on the dialer was 4/20/98 2:21:12 PM.
See section Archive Menu, Page 63 for a detailed description of each of these fields.
There are two ways to receive archives from the dialer: either for a specific channel or for all the
channels. To receive archives for all the channels, click on the Transfer Archives button at the
bottom right of the menu.
When clicked, notice that all the boxes in the Receive Stored Dialer Archives column will become
marked. The archives will then be transferred to MicroWIN 2000. While the records are being
received, the View Archives number and the Receive Stored Dialer Archives number will update
appropriately. When a channel has finished receiving its records, it will unmark this particular
channel and move on to the next channel.
The other way to receive archives is by receiving only a particular channel’s archives. This is done
by clicking the Receive Stored Dialer Archives button for the particular channel. Note that this will
only work when the entry is connected to its dialer.