Microtel MicroWin 2000 - Manual (Page 42)

MicroWIN 2000 Manual
Version 1.0
37
At this point, the Realtime Data menu will be displayed again with the Send Config selection
marked.
The archiving setup will now be transferred to the dialer.
To see the current status of the transfer, look at the Status box in the upper left corner. It will
show detailed information about what is being transferred. Once the transfer is complete, the
Send Config button will unmark itself.
Once this data has been sent, the dialer will start archiving as was configured.
Receiving Archives From the Dialer
To receive archives from the dialer, move to the Archive Transfer Menu: click the Archive
Menu button on the Realtime Data form.
The Archive Transfer Menu shows the current archiving status for an entry while connected to its
dialer.