Microtel Series 500 - Manual (Page 11)

4
I. INTRODUCTION
I.A.
General Information and Theory of Operation
The Microtel MCS 500 Dialer is a complete Automatic Dialing telemetry system, capable
of fulfilling virtually any type of alarm monitoring or data acquisition need. The basic
system is capable of monitoring alarm conditions on a variety of analog and digital
channels, and advising personnel of the conditions which exist at the remote monitored
site. Upon detection or determination of an alarm condition, the system will place a
series of telephone calls to as many as 64 different telephone numbers. Using its own
“default” voice messages or using user-entered “Real Voice” messages, the system will
advise the call recipient of the location and the nature of the alarm conditions which
caused the call sequence.
A variety of programmable features make the Microtel MCS 500 Dialer the most
versatile and sophisticated alarm dialer available. An extensive remote programming
capability allows the user to reprogram the system using a standard tone dialing
telephone.
The system contains separate computer and I/O buses, allowing field configuration,
upgrading, and expansion of the basic system to meet the individual needs of the user.
Whether the monitoring requirement is 8 channels or 40 channels, with digital inputs,
analog inputs, or relay outputs - the system may be field configured and upgraded
without removing it from service.
A unique voice mail feature allows the user to send messages of interest to other
personnel involved with a monitored site. Voice mail messages are either deposited in
the system for access by other callers, or may be delivered by the system to any other
telephone number.
.
II. UNPACKING AND INITIAL EQUIPMENT INSPECTION
Microtel takes all possible precautions in packaging each item to prevent shipping
damage. Carefully inspect each package at the time of receipt for signs of physical
damage. Report damage claims to the shipping agent involved immediately. Do not
install damaged Equipment with suspected damage.
All instructions given on any attached labels or tags should be followed. Carefully
inspect all packing material before discarding it to prevent loss of accessories, mounting
hardware, spare parts, or instruction. If the unit is not to be installed immediately,
repack it in the shipping carton to protect it in storage.
NOTE: The manual should be reviewed prior to installation and operation of the system