Microtel Series 500 - Manual (Page 46)

39
IV.D.4.a. Printer Output Enable
To enable and disable the printer access the first field in the Printer Setup screen. By
using the SELECT key, the printer enable will toggle between the two selections. Lock
in the desired choice by using the cursor key to move away from the field.
IV.D.4.b.
Printer Output Reset
To cause the system to send a reset command to the connected printer, highlight and
activate the RESET field, using the SELECT key.
IV.D.4.c.
Printer Output Form Feed
To cause the system to send a form feed command to the connected printer, highlight
and activate the FORM FEED field, using the SELECT key.
IV.D.4.d.
Printer Output System Setup Information
To print all of the system’s setup information, highlight and activate the OUTPUT
SETUP INFORMATION field, using the SELECT key.
IV.D.4.e.
Printer Output Test
To cause the system to send a stream of test characters to the printer, highlight and
activate the Test field, using the SELECT key. This sequence is helpful in verifying the
correct installation of the printer.