Microtel Series 500 - Manual (Page 26)

19
The following is a list of the different messages which may be programmed by the user
for each type of channel or category:
Message Duration Default Message
System ID 6 seconds “Microtel System 500”
Digital Input 3 seconds “Digital Input xx”
Digital Output 6 seconds “Digital Output xx”
Analog Input 6 seconds “Analog Input xx”
Voice Mail Message remaining memory
All other messages which the dialer articulates are composed by the system, using
synthesized speech data resident in the system. These messages are primarily used
during remote programming operations, where the user receives speech prompting
during telephone tone key entries.
IV.C.
System Level Programming
To program the items which are classified as System Level, the System Setup Screen
must be selected. To do so, first press the HALT key. The system Status Screen will
be displayed. Using the cursor control keys highlight SYSTEM SETUP and depress
SELECT. System level data may now be selected and edited using the following
procedures.
IV.C.1.
System ID Text
The System ID Text is the name given to the MCS 500 in its installed application. The
name may be up to 16 alpha-numeric characters in length. The default System ID Text
is Microtel 500.
To change the ID test, cursor to the field, and press the SELECT key. The first
character of the field will flash, indicating it is available for editing. Enter digits or
alphabetical characters, filing the field with up to 16 characters ID test. To enter
alphabetical characters (including space-SP, and period-.) use a dual key entry
preceded by the BLUE or the RED keys. The cursor control keys may be used to freely
move back and forth, from character position to character position within the field.