Microtel Series 500 - Manual (Page 20)

13
Repairs that you are authorized to make on the Microtel MCS 500 Dialer include
replacing the fuse, replacing the battery, and exchange of the power supply and certain
other plug-in circuit cards.
The Microtel MCS 500 Dialer may not be used on coin service equipment provided by
the Telephone Company. Connection to party lines is subject to state tariffs (contact
your state public utility commission or corporation commission for information).
III.E.
Initializing the System
III.E.1.
Accessing the Dialer Test and Setup Screen
From the System Status Screen, press the SEQUENCE key to access the Dialer Test
and Setup Screen. This Screen contains many sequences which are used to setup
(initialize) the system and to test various functions. Use the PREVIOUS and NEXT
keys to access the functions and the SELECT key to invoke them.
III.E.2.
Test and Initialization Sequences
Test Options
VERSION
When selected, this sequence shows the software program release
numbers and dates. Press any key to return to the Dialer Test and
Setup Screen.
SPEECH
When selected, this sequence causes all internal “core” vocabulary
to be articulated.
MEMORY1
When selected, this sequence tests Real Voice Speech Data
memory locations on RV card #1. This test takes approximately
two minutes to complete. Any user programmed digitized speech
data is retained during this test.
MEMORY2
When selected, this sequence tests Real Voice Speech Data
memory locations on RV card #2.