Microtel Series 500 User Manual
Page 54
47
Digital Input Channel (01 through 40). After entry of the desired Digital Input Channel,
access will be granted to the following functions. Enter the digit corresponding to the
desired function.
1.
Play or Change ID Message
2.
Query
Current
Condition
3.
Query or Change Digital Input Channel Mode
4.
Query or Change Telephone List
5.
Query or Reset Digital Input Channel Totalizer
6.
Query or Reset Total Time In Alarm Accumulator
7
Query Current Time In Alarm Value
VI.C.
Analog Input Channel Programming
Enter 2 from the Remote Operation Basepoint (“System Ready”) to access the Analog
Input Channel Functions. Following such an entry, the system will prompt for a specific
Analog Channel (01 through 20). After entry of the desired Analog Channel, access will
be granted to the following functions. Enter the digit corresponding to the desired
function.
1.
Play or Change ID Message
2.
Query Current Condition and Reading
3.
Query or Change Analog Input Channel Mode
4.
Query or Change Telephone List
VI.D.
Digital Output Channel Programming
Enter 3 from the Remote Operation Basepoint (“System Ready”) to access the Output
Channel Functions. Following such an entry, the system will prompt for a specific Relay
Output Channel (01 through 20). After entry of the desired Output Channel, access will
be granted to the following functions. Enter the digit corresponding to the desired
function.
1.
Play or Change ID Message
2.
Query or Change Current Condition
VI.E.
Intercom Functions
Enter 4 from the Remote Operation Basepoint (“System Ready”) to access the System
Speakerphone and Intercom Functions. Following such an entry, select 1 to open up
the audio channel and use # to change the direction of the speech path between
transmit and receive.