Vertical Communications GCA70-248 - Manual (Page 11)

Setting a Personal Ringing Tone
You can choose one of eight different ring tones for your telephone. Often, when
several telephones are located close together, each user chooses a different personal
ring tone.
· To select one of the ring tones, proceed as follows:
1. PRESS
INTERCOM.
2. DIAL
**4
.
3. DIAL number (
1
to
6
) to select ring tone.
4. The next time your telephone rings, you will hear the new ring
tone.
Setting Volume Levels
The volume control on your telephone is a multipur-
pose control you use to set the volume (loudness) of
the ringer, the speaker, and the handset.
· To set the ringer loudness level,
1. While your telephone is on-hook and
idle, PRESS the
VOLUME UP OR
VOLUME DOWN button once for each
change in loudness you desire. The
ringer sounds once for each change as
an example of the current setting.
NOTE: If you set the ringer to the “off” position, your telephone will sound a
short ring burst once for each call you receive at your station.
NOTE: On the 8112N, the ringer volume is controlled by a three-position switch
on the bottom of the telephone. There is no handset volume control.
Non-LCD Speakerphone Station User’s Guide 3
GCA70-248 Getting Started
Impact SCS Volume Buttons