Vertical Communications GCA70-248 - Manual (Page 60)

Assist Button
With this feature you can program an ASSIST button on your telephone that will let
you send a message to an LCD station.
· To program an assist button,
1. PRESS
INTERCOM AND DIAL
**1
.
2. PRESS programmable button you want as ASSIST button.
3. DIAL
7
.
4. CHOOSE form one of the following options to select the type of
message that will be delivered with the ASSIST button:
• DIAL
*
to choose system-provided message ( ASSIST
plus name or extension number of station sending mes-
sage)
• DIAL keypad number (
1
,
2
,
3
etc.) to choose pre-
programmed message (see attendant or table on page 42
for list of LCD messages).
5. IF one particular station must always receive message, DIAL
extension number of that station.
6. PRESS
SPEAKER to end.
52 Non-LCD Speakerphone Station User’s Guide
Programming GCA70-248