Vertical Communications GCA70-248 - Manual (Page 18)

Your Station’s Display Lights
The lights (LEDs) on your LCD speakerphone indicate the status of lines,
features, and intercoms.
Busy Lamp Field (BLF) lights (next to a Direct Station Select/Busy
Lamp Field or
DSS/BLF programmable button):
· Steady red = station is in use.
· Flashing red = station is receiving a call.
· Winking/Fluttering red = message-waiting light set for you by station
associated with that
DSS button.
Next to a line button:
· Steady green = this is your line, either on-hook (in a hands-free mode) or
off-hook, when the line is active.
· Steady red = another station is using this line.
· Flashing red = a call is coming in on this line.
· Flashing orange = this line will be answered when you lift the handset.
· Winking green = your line is on hold.
· Winking red = the call has been placed on hold by another station.
· Fluttering orange or green = your line has recalled from hold.
· Fluttering red = the line put on hold by another station has recalled.
NOTE: You can find the programmable buttons that the installer designates
line buttons in the same location as the
DSS/BLF buttons. Ensure that these
buttons are labeled correctly to indicate their unique features.
Next to a fixed feature or programmable feature button:
· Steady red = the feature is on.
· Steady off = the feature is off.
NOTE: You can find the programmable buttons that the installer designates
feature buttons through user programming in the same location as the
DSS/BLF programmable buttons. Ensure that these buttons are labeled cor-
rectly to indicate their unique features.
Above the
MUTE button:
· On steady = called party cannot hear your conversation.
10 Non-LCD Speakerphone Station User’s Guide
Getting Started GCA70-248