Answering and making calls, When you hear outside ringing (two long bursts), When you hear intercom ringing (two short bursts) – Vertical Communications GCA70-248 User Manual
Page 12
·
To set the speaker and handset
loudness levels,
1. PRESS
INTERCOM button.
2. PRESS the
VOLUME UP OR VOLUME
DOWN button once for each change in
speaker volume that you desire.
3. LIFT handset.
4. PRESS the
VOLUME UP OR VOLUME
DOWN button once for each change in
handset volume that you desire.
NOTE:
When a call ends, the system resets the speaker and handset volume
of all future calls to the programmed (default) setting. For instructions in
setting your station’s default volume, see Default Volume Control section in
the system specific Advanced Features chapter.
Answering and Making Calls
Your station is now properly configured to answer and making calls to both stations
within your system (intercom calls) and outside lines. Remember that when dialing
an outside number, you must first select a line to connect your system to the local
exchange.
·
When you hear outside ringing (two long bursts),
1. PRESS flashing line button.
2. SPEAK toward telephone OR LIFT handset if privacy is
desired.
·
When you hear intercom ringing (two short bursts),
1. PRESS
INTERCOM.
2. SPEAK toward telephone OR LIFT handset if privacy is
desired.
4
Non-LCD Speakerphone Station User’s Guide
Getting Started
GCA70-248
Impact 8124 Volume Control