Vertical Communications GCA70-248 - Manual (Page 34)

Redialing
Redial - Last-Dialed Number
The system temporarily saves the first 16 digits of the last manually dialed number
for your redial use—if the last number you called is busy or is not answering, you
can redial it once or initiate repeated redialing. Subsequent dialing activity
overwrites a temporarily saved number.
· To redial the last-dialed number,
1. PRESS
SPEAKER OR HANG UP handset to disconnect current
ringing or busy tone.
2. DIAL
#
.
3. LIFT handset OR LISTEN for ringing or busy tone over the
telephone speaker:
Automatic Redialing
· To redial the number once a minute for 10 minutes,
1. PRESS programmed AUTOMATIC REDIAL button. (See page
51 for directions on programming an AUTOMATIC REDIAL
button.)
The number will be dialed once a minute for 10 minutes (INTERCOM light flashes).
Listen for ringing or busy tone over the monitor speaker.
NOTE: You must pick up the handset once the call is connected, or the system
will disconnect the call after 30 seconds.
· To cancel this automatic redial action,
1. LIFT AND REPLACE handset OR, USE the telephone for
some other function.
The INTERCOM light then turns off and the phone returns to idle.
26 Non-LCD Speakerphone Station User’s Guide
Making Calls GCA70-248