Vertical Communications GCA70-248 - Manual (Page 55)

NOTE: You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your atten-
dant about this). To store a pause, press
HOLD , then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press
TAP to store a hookflash, then continue dialing.
Also, you may need to erase the typed digits appearing in your display to
correct them. If you do, select BKSP once for each digit to be removed.
6. PRESS
TRNS/CONF to store number.
7. PRESS next location button AND STORE next number.
8. REPEAT previous step until all numbers are stored, OR PRESS
SPEAKER to end.
Non-LCD Speakerphone Station User’s Guide 47
GCA70-248 Programming
Speed Dial Numbers
DIAL desired number
for personal speed dial
DIAL and number
for system speed dial
OR
S
Autodial Numbers
PRESS button of
desired station
to dial directly 2
ABC
1 3
DEF
6
MNO
5
JKL
4
GHI
7
PRS
8
TUV
9
WXY
# 0 *
SPEAKER
MESSAGE
TRNS/CONF
HOLD
MUTE
TAP
R
Speedial and Autodial Programmable Locations